Exhibitors

There is no mechanical component entering into the metarial. Sampling is done by air shock principle. Need for maintenance is minimum. System serves for many years without any problem to the customers. The sample collected by New Technology Super Shock Sampling Systems completely represented the lot. The sample increment geometry is almost perpendicular to the conveyor belt axis. Since the sampling procedure is carried out by aşr shock that reaches a speed much more than the speed of sound. Therefore, sample increment is extracted as a whole crosscut.

Super Shock Air Cannons solve adhesion and blockage problems in places such as silos, bunkers where you store the material, or in conveying areas such as transfer chamber, cyclone, chute, regardless of the material size, content, humidity condition. With the new mechanical piston technology developed the Air Cannon System works successfully in every cold-hot environment like bunker, silo, cyclone, transfer chamber, chute. Your loss of production, energy and workmanship is eliminated, Prevents unnecessary wear of your working machines and equipment, Your work schedule runs problem-free, you fulfil your obligations on time, The money paid for the Air Cannon system returns in a very short time, flawless service continues for many years. Serves for many years with minimal maintenance and spare parts needs It works completely automatically, it can be set to the desired period with an electronic control system. Low pressures are sufficient for operation (6-8kg/cm2). It has a special pneumatic system. Air demand is very low. It is a 100% exact and final solution. It does not vibrate and can be mounted on all kinds of concrete, steel silos, bunkers and tanks. The piston, which is the only moving part, has also been developed and turned into a mechanical piston that can serve for many years with minimum maintenance. The first quality service is offered to you from the greatest manufacturer in its fields of production, in Turkey.

Continuous magnetic metal separators with high magnetic force and reliability for the capture of ferrous metals in various products transported by conveyor belt systems General Characteristics It has a powerful magnetic circuit designed to reach the metals buried under materials and capture and extract them. It has an extra-large magnetic field for an extended magnetic sweep field. It has an equal or even greater magnetic force than an electromagnet of the same size. The magnetic field is not at a single point, it is distributed uniformly and evenly throughout the width of the belt. Loses less than 5% of its strength in 1000 years. In other words, separators made of permanent magnets (natural magnets) have an eternal life. Magnetic systems can be designed as Cross-Belt and In-Line. Because the system has stainless-steel body and modular side frames it is also very easy to disassemble. It is manufactured in the form of welded construction in accordance with the industrial standards. There are 4 paper hanging pads for easy installation. Benefits Magnetic metal separators protect your factory, equipment and machines from damage that can be caused by ferrous metals. Magnetic metal separators improve product quality. Thanks to our new type of magnetic metal separators, it is possible to perform ferrous metal collection applications that the inappropriately designed, low-strength magnetic metal separators cannot perform.

Due to the piping system that we will design for your facility and the opening/closing mechanisms, valves, special fasteners that will be placed on this line and quick connection ends, there will be no point beyond the reach of SUPERVAC. Your plant, machinery and equipment will be free of dust, maintenance and service life will be extended.

With the system mounted on the truck, it can make the transportation process much faster and easier. It is unique for its ability to clean wet and dry materials. A vacuum system of different sizes and ratings is designed specifically for your plant. Your plants can be located at long distances and in different cities, ease of movement is possible with truck-type vacuum system.

It has a main control panel with Color Graphics 4.2 LCD display, microprocessor with two channel I/O boards. It is equipped with 2 load cell mounting groups to be placed on a single idler group chassis. There is a digital speed sensor, It is delivered with mounting accessories. The control panel has digital structure. The options on it are in the form of icons and are also visible in sunlight at a certain distance. There is a USB connection inside the control panel. Calibration and production information can be stored with the USB Disk connected to the USB input. The power supply of the control panel is inside its own board. Instant passing material quantity and total material quantity up to that moment and belt speed information can be displayed on the control screen. Zero calibration can be performed via the control panel and span settings can be entered. The control panel has an error reporting feature. There is an Ethernet Connection (Modbus TCP, FTP) without a converter in the control panel. The control panel also outputs two 4 20 mA output signals. There is also an RS-232 output as standard on the control panel. By this means, all information can be sent to a printer, a PC or display (remote viewing screen). Thanks to the programmable digital inputs and outputs located on the I/O board available in the system, a connection can be made to the PLC Automation system or another device located outside. It is very easy to assemble. Can be made by using your idler chassis. It is not a problem if your conveyor belt is angled. It has the limitations given in IP 65 standards Our recommended system has a sensitivity value between 0.5% and 1%. (It may vary depending on the installation location.) Our system makes its own automatic calibration for many years by checking itself, after the first run calibration With an Optional Angle Sensor, it takes accurate measurements on Moving Belts at the time of movement or even if the conveyor angle changes.

Heavy Industry Type Metal Detectors The Metal Detector body is made of stainless steel, which allows it to be used for many years. The detection head of the metal detector is made of air and waterproof. Factors such as dust in the working environment do not affect the machine. The routine maintenance of the metal detector is very simple, it can be easily cleaned. Special design is made according to the needs of each industry. An evacuation system and transported rails can also be installed in the metal detector system. The metal detector can give alarm or light notification or stop the machine according to your request when metal is detected