Exhibitors

Levent 1001 the smallest and most compact, all hydraulic mechanized core drill in the Levent range. Levent 1001 is ideal for coring and grout hole drilling in narrow tunnels or galleries as well as in cramped spaces underground. The Levent 1001 drill is equally efficient for surface drilling operations. As an option the drill unit can be mounted on carriers for special purposes like a; a narrow crawler for underground use, or a wide crawler for surface use. The drill unit can be powered by an electric motor or diesel engine. When the drill rig is equipped with the electrical power unit, as an optional diesel engine for tramming is available. The compact design and light weight, makes the Levent 1001 easy and fast to set-up for drilling. This in turn offers quicker moves between drill sites, without disturbing normal production routines in the mine or grouting sequences in dam galleries. To achieve the best results with regard to: -high penetration -optimal core recovery -and low drilling costs It is of primary importance that drill rods,core barrels and coring bits are of the right type and quality,matched to the rock drill and to the prevailing rock conditions. Bearing in mind core drill s speed of rotation,its rating and chuck diameter, the LEVENT 1001 is best suited to drill holes 36-46 mm in diameter (A). The spindle inner diameter is 50 mm (1.97 in) in the A-size rotation unit.

The Levent 2002 is an all-hydraulic diamond core drill rig with a wide range of options and accessories.It consists of three main parts: the drill unit a power unit and a control console. As an option the drill unit can be mounted on carriers for special purposes like a; a narrow crawler for underground use, or a wide crawler for surface use. It is suitable for a variety of drilling methods in both underground and surface operations such as core drilling, grout hole drilling, probing etc.. The drill unit can be powered by an electric motor or diesel engine. When the drill rig is equipped with the electrical power unit, as an optional diesel engine for tramming is available. The Levent 2002 uses the best technology available for diamond core drills. All tube jointing, thread breaking, feeding, wireline hoist sequences are controlled from a control console which can be positioned to suit the setup. Feeding is done by a direct cylinder and chain system. The drill can be equipped with three different feed lenghts,and two different sizes of rotation units to suit rod size and drilling applications. To achieve the best results with regard to: -high penetration -optimal core recovery -and low drilling costs It is of primary importance that drill rods,core barrels and coring bits are of the right type and quality, matched to the rock drill and to the prevailing rock conditions. Bearing in mind core drill s speed of rotation,its rating and chuck diameter, the LEVENT 2002 is best suited to drill holes 48-76 mm in diameter (A-N) using both conventional as well as wire line rods. The spindle inner diameter is 78 mm (3.07 in) in the N-size rotation unit.

The Levent 3003 is an all-hydraulic diamond core drill rig with a wide range of options and accessories.It consists of three main parts: the drill unit a power unit and a control console. As an option the drill unit can be mounted on carriers for special purposes like a; a narrow crawler for underground use, or a wide crawler for surface use. It is suitable for a variety of drilling methods in both underground and surface operations such as core drilling, grout hole drilling, probing etc.. The drill unit can be powered by an electric motor or diesel engine. When the drill rig is equipped with the electrical power unit, as an optional diesel engine for tramming is available. The LEVENT 3003 uses the best technology available for diamond core drills. All tube jointing, thread breaking, feeding, wireline, hoist sequences are controlled from a control console which can be positioned to suit the setup. Feeding is done by a direct cylinder, thereby eliminating chains in the feed system. The drill can be equipped with two different feed lenghts,and two different sizes of rotation units to suit rod size and drilling applications. To achieve the best results with regard to: -high penetration -optimal core recovery -and low drilling costs It is of primary importance that drill rods,core barrels and coring bits are of the right type and quality,matched to the rock drill and to the prevailing rock conditions. Bearing in mind core drill s speed of rotation,its rating and chuck diameter, the LEVENT 3003 is best suited to drill holes 60-96 mm in diameter (B-H) using both conventional as well as wire line rods. The spindle inner diameter is 101.6 mm (4 in) in the H-size rotation unit.

The LEVENT 4004 is an all-hydraulic diamond core drill rig with a wide range of options and accessories.It consists of three main parts: the drill unit a power unit and a control console. As an option the drill unit can be mounted on carriers for special purposes like a; a narrow crawler for underground use, or a wide crawler for surface use. It is suitable for a variety of drilling methods in both underground and surface operations such as core drilling, grout hole drilling, probing etc.. The drill unit can be powered by an electric motor or diesel engine. When the drill rig is equipped with the electrical power unit, as an optional diesel engine for tramming is available. The LEVENT 4004 uses the best technology available for diamond core drills. All tube jointing, thread breaking, feeding, wireline, hoist sequences are controlled from a control console which can be positioned to suit the setup. Feeding is done by a direct cylinder, thereby eliminating chains in the feed system. The drill can be equipped with two different feed lenghts,and two different sizes of rotation units to suit rod size and drilling applications. To achieve the best results with regard to: -high penetration -optimal core recovery -and low drilling costs It is of primary importance that drill rods,core barrels and coring bits are of the right type and quality, matched to the rock drill and to the prevailing rock conditions. Bearing in mind core drill s speed of rotation,its rating and chuck diameter, the LEVENT 4004 is best suited to drill holes 60-96 mm in diameter (B-H) using both conventional as well as wire line rods. The spindle inner diameter is 101.6 mm (4 in) in the H-size rotation unit.

RX-4 is fully hydraulic diamond core drilling rig, designed for surface research drillings. It is the perfect combination of the proven RX concept, combined with new and powerful components. The RX-4 uses well proven technology for diamond core drills combined with new improvements in order to get easy drill operation. Hydraulic jacks, mast dump, hinged top mast and all controls available at the control panel provide the driller an easy set-up. Other features such as the strong main winch, powerful direct feed cylinder, advanced diesel engine,telescopic mast and Hydraulic Rod Holder. RX-4 Coring Rig rotation speed, power and rotation unit aperture diameter is designed to give optimal performance in 60-122.6 mm (B-P) diameter wireline or conventional drilling. RX-4, drilling unit, power unit, wireline unit (automatic winding system), main winch control of the mixer and mud pump are performed from the operator panel. The gauge located on the operator panel displays, drilling rig advancement position; Hold back force, Feed force, Rotation speed, It can observe the data and is able to control diesel engine. RX-4, can be mounted on 3 different chassis. Skid frame Wheel frame Crawler frame RX-4 drilling rig, as progress is being achieved with the drilling rig hydraulic cylinder, more precise settings can be done. RX-4 drilling rig, automatic rod removal and clamping feature allows high progress rate, optimal core percentage and big time save.

RX-5 is fully hydraulic diamond core drilling rig, designed for surface research drillings. It is the perfect combination of the proven RX concept, combined with new and powerful components. The RX-5 uses well proven technology for diamond core drills combined with new improvements in order to get easy drill operation. Hydraulic jacks, mast dump, hinged top mast and all controls available at the control panel provide the driller an easy set-up. Other features such as the strong main winch, powerful direct feed cylinder, advanced diesel engine, foldable mast and Gas Spring Rod Holder. RX-5 Coring Rig rotation speed, power and rotation unit aperture diameter is designed to give optimal performance in 60-122.6 mm (B-P) diameter wireline or conventional drilling. RX-5, drilling unit, power unit, wireline unit (automatic winding system), main winch control of the mixer and mud pump are performed from the operator panel. The gauge located on the operator panel displays, drilling rig advancement position; Hold back force, Feed force, Rotation speed, It can observe the data and is able to control diesel engine. RX-5, can be mounted on 3 different chassis. Skid frame Wheel frame Crawler frame RX-5 drilling rig, as progress is being achieved with the drilling rig hydraulic cylinder, more precise settings can be done. RX-5 drilling rig, automatic rod removal and clamping feature allows high progress rate, optimal core percentage and big time save.

RX-7 is fully hydraulic diamond core drilling rig, designed for surface research drillings. It is the perfect combination of the proven RX concept, combined with new and powerful components. The RX-7 uses well proven technology for diamond core drills combined with new improvements in order to get easy drill operation. Hydraulic jacks, mast dump, hinged top mast and all controls available at the control panel provide the driller an easy set-up. Other features such as the strong main winch, powerful direct feed cylinder, advanced diesel engine, foldable mast and Gas Spring Rod Holder. RX-7 Coring Rig rotation speed, power and rotation unit aperture diameter is designed to give optimal performance in 60-122.6 mm (B-P) diameter wireline or conventional drilling. RX-7, drilling unit, power unit, wireline unit (automatic winding system), main winch control of the mixer and mud pump are performed from the operator panel. The gauge located on the operator panel displays, drilling rig advancement position; Hold back force, Feed force, Rotation speed, It can observe the data and is able to control diesel engine. RX-7, can be mounted on 3 different chassis. Skid frame Wheel frame Crawler frame RX-7 drilling rig, as progress is being achieved with the drilling rig hydraulic cylinder, more precise settings can be done. RX-7 drilling rig, automatic rod removal and clamping feature allows high progress rate, optimal core percentage and big time save.

TP Series Triplex Pumps are generally designated pump water and mud. They can be equipped in three different ways as Electrical motor, Diesel engine and Hydraulic driven motor. Triplex Pumps spare parts, ceramic cylinders, stainless valves, balls and seals can be easily changed. The three cylinders, which are made of steel reinforced ceramic material, are durable against to corrosion and can be changed easily. The valves, which are in the form of ball, are made of stainless steel and the valve seats are manufactured from tempered steel. The pump safety valve adjusted according to 50 bar pressure. If the pressure in the system exceeds these values, then the safety valve activates and by means of this the pump housing is protected against to excessive pressure. The pump safety valve can be adjusted to lower values mentioned above, however, it should not be adjusted over 70 bar. The pressure values can be observed with a manometer 0-100 bar.

SON-MAK - EP Model Grout Pumps have different work pressure and flow according to injection types. The Pumps have features to carry out grouting (1 - 5 mm) mixed sand. The piston pumps are used according to the necessity of the work and the situation. The piston pumps are sensitive regarding flow and pressure control compared to the other types pumps. SON-MAK - EP Grout Pumps can be single or double cylinders and they are manufactured in different flows and pressures. The movement of the pistons are driven by electrical, air and diesel motor. With respect to occupational safety and health and as its size are small, the Grout Pumps worked with air and electrical motor are prefered to carry out grouting in enclosed areas such as tunnel and shaft. Advantages Easy of use, Easy to demontage of the parts and montage, To gain high pressure and flow, Easy to clean of the injection, Being economical compared to other type of pumps, To be driven by Electrical motor, Air motor and Diesel Engine. Applications Jet Grout Drilling Concreting Anchor Injection Tunnel Project Dam Project

No product info found.